Edit ModuleShow Tags
Edit ModuleShow Tags

Ucore Increases Resource at Bokan Dotson-Ridge

Rare earth elements upgraded


Published:

May 11 , 2015 - Halifax, Nova Scotia - Ucore Rare Metals Inc. (TSX-V:UCU)
(OTCQX:UURAF) ("Ucore" or "the Company") is pleased to announce an upgraded and increased resource estimate ("Resource" or "Mineral Resource") for the Bokan Dotson-Ridge rare earth element project in Southeast Alaska ("Bokan").

An additional 1.043 million tonnes of newly estimated Inferred mineralization grading 0.604% TREO at a cut-off grade of 0.40% TREO has now been added to the total Resource at Bokan, as a result of deeper exploratory drilling during the 2014 field season.

Further, more than 98% of the previously established Resource has now been
upgraded to the fully Indicated category under NI 43-101 standards by way of
supplemental infill drilling. The previously announced Resource, consisting of 2.936 million tonnes in the Indicated category and 1.995 million tonnes in the Inferred category under NI 43-101 standards at the same cut-off grade, was announced by Ucore in a press release dated Oct. 21, 2013.

The Company is additionally pleased to report that the anomalous skew towards the more valuable heavy rare earths ("HREO") remains consistent across the entire deposit, at approximately 40% of total rare earths ("TREO"). The Resource remains open both at depth and along strike.

"We're pleased to announce this important Resource upgrade as Ucore continues its progress toward production," said Jim McKenzie, President & CEO of Ucore. "The completion of deeper drilling continues to add significantly to mineralization at greater depth, which is consistent with our geological model of deep seated hydrothermal events. What's more, the Resource remains open at depth and along strike, with the prospect of ongoing exploration even after production has been achieved. This Resource upgrade, together with our recent advances in Molecular Recognition Technology for refining applications, makes for a compelling mine to metal story at Bokan."

 

A summary of the upgraded Resource estimate is as follows:

Indicated Mineral Resource Estimate

%TREO

CUT-OFF

TONNES

LREO

(%)

HREO
(%)

TREO

(%)

Contained TREO (lbs)

.20

5,786,500

0.331

0.221

0.552

70,418,800

.30

5,411,900

0.345

0.228

0.573

68,365,700

.40

4,787,900

0.363

0.239

0.602

63,544,100

.50

3,532,900

0.395

0.258

0.653

50,860,200

.60

2,110,100

0.440

0.285

0.725

33,726,800

 

Inferred Mineral Resource Estimate

%TREO

CUT-OFF

TONNES

LREO

(%)

HREO
(%)

TREO

(%)

Contained TREO (lbs)

.20

1,201,100

0.343

0.224

0.567

14,934,500

.30

1,136,400

0.355

0.230

0.584

14,631,100

.40

1,050,000

0.365

0.237

0.603

13,958,600

.50

820,400

0.389

0.255

0.645

11,665,900

.60

507,300

0.421

0.286

0.707

7,907,100

 

Notes:

1. Total Rare Earth Oxides (TREO) includes: La2O3, Ce2O3, Pr2O3, Nd2O3, Sm2O3, Eu2O3, Gd2O3, Tb2O3, Dy2O3, Ho2O3, Er2O3, Tm2O3, Yb2O3, Lu2O3, Y2O3

2. Heavy Rare Earth Oxides (HREO) includes: Eu2O3, Gd2O3, Tb2O3, Dy2O3, Ho2O3, Er2O3, Tm2O3, Yb2O3, Lu2O3, Y2O3

3. The mineral resource estimate was completed by Mr. Jim Robinson, a Senior Consulting Geologist at Aurora. Mr. Robinson is an independent qualified person for the purposes of NI 43-101 standards of  disclosure for mineral projects of the Canadian Securities Administrators and has verified the data disclosed in this release. A Technical Report with the estimate will be filed on SEDAR within 45 days.

4. The resource estimate is based on:

* A database of 97 diamond drill holes totaling 20,000 m and 56 surface channels totaling 200 m.

This diamond drilling and channel sampling was completed by Ucore in 2008, 2009, 2010, 2011 and 2014 on the Dotson Ridge zone.

* All geochemical analyses were performed by ALS Chemex, Eco-tech Laboratories Ltd., Bureau Veritas (ACME Analytical), and Activation Laboratories.

* The specific gravity (SG) used is the overall mean of 2.77, determined from 141 SG readings.

* Block model was estimated by the Inverse Distance Squared interpolation method on blocks of maximum 4 m x 4 m and minimum 1 m x 1 m dimensions.

* All REE assays exceeding the 95% confidence level (CL) were cut to the 95% CL for each element.

* All intercepts with a true width of less than 1.5 m were diluted to a potential mining width of 1.5 m.

The upgraded Resource has been prepared by Aurora Geosciences (Alaska) Ltd. of Juneau, Alaska ("Aurora"). As a third-party consultant, Aurora was additionally responsible for the data collection, quality control, modeling, and reporting associated with the Resource estimate upgrade.

Mineral Resources were modeled via ten alternative total rare earth oxide (TREO) cutoff grades, with a baseline case ("Base Case") employing a TREO cut-off of 0.4%. The Base Case renders an Indicated Mineral Resource of 4.84 million tonnes grading 0.601% TREO, an Inferred Mineral Resource of 1.04 million tonnes grading .604% TREO, and a skew of approximately 40% HREO over TREO. 

In keeping with the initial mine design set out by Stantec Inc. of Tempe, AZ, ("Stantec"; released April 18, 2012), the upgraded Mineral Resource excludes the I&L Zone (previously included in the initial resource estimate released by the Company March 7, 2011). On the recommendation of Stantec, I&L mineralization, located outside of the primary Dotson Zone of mineralization, will be examined as part of a prospective Phase II mine expansion program after the commencement of initial mine production.

 

Rare earth grades by individual light rare earth oxides at the 0.4% cut-off are as follows:

 

La2O3

Ce2O3

Pr2O3

Nd2O3

Sm2O3

Indicated

.070

.170

.020

.083

.022

Inferred

.070

.170

.020

.083

.022

 

Rare earth grades by individual heavy rare earth oxide at the 0.4% cut-off are as follows:

 

Eu2O3

Gd2O3

Tb2O3

Dy2O3

Ho2O3

Indicated

.002

.022

.004

.025

.005

Inferred

.002

.023

.004

.025

.005

 

Er2O3

Tm2O3

Yb2O3

Lu2O3

Y2O3

Indicated

.013

.002

.010

.001

.154

Inferred

.013

.002

.010

.001

.152


The drill-defined Mineral Resource at Bokan Dotson-Ridge commences at surface and is open both at depth and along strike. Additional information regarding significant drill results from the Company's prior exploration programs and maps and sections detailing the drill-hole locations and individual REE values are available at: www.ucore.com.

The Company is working towards the completion of a Feasibility Study, which will
incorporate the results of this upgraded Mineral Resource estimate. 

NI 43-101 Compliance

James Robinson, P.Geo., an independent geologist with Aurora Geosciences, has prepared the technical data provided in this news release and is the qualified person responsible for its accuracy.

Background
Ucore Rare Metals Inc. is an early stage mine development company focused on rare earth elements, strategic and technology metals. With multiple projects across North America, Ucore's primary focus is the Bokan - Dotson Ridge REE property in Alaska. The Bokan - Dotson Ridge REE project is located 60 km southwest of Ketchikan, Alaska and 140 km northwest of Prince Rupert, British Columbia and has direct ocean access to the western seaboard and the Pacific Rim, a significant advantage in expediting mine production and limiting the capital costs associated with mine construction. The Bokan properties are located in an area reserved for sustainable resource development.

For further information, please contact Mr. Jim McKenzie, President and Chief
Executive Officer of Ucore Rare Metals Inc. at: (902) 482-5214 or visit www.ucore.com

This press release includes certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical facts, that address future exploration drilling, exploration activities and events or developments that the Company expects, are forward-looking statements. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include exploitation and exploration successes, continued availability of financing, and general economic, market or business conditions.

 
 
Edit Module

Add your comment:
Edit Module Edit ModuleShow Tags
Edit ModuleShow Tags
Edit ModuleShow Tags
Edit ModuleShow Tags
Edit ModuleShow Tags
Edit ModuleShow Tags

Connect With Us

   

 

Edit ModuleShow Tags